View MF-R400_477461.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features
NT M PL
Applications
Almost anywhere there is a low voltage power supply and a load to be protected, including: Computers & peripherals General electronics Automotive applications

R1 01810 0T

Radial Leaded Devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* Agency recognition:
T V Rheinland
*R
oH
S
CO
IA
MF-R Series - PTC Resettable Fuses
Electrical Characteristics
Initial Resistance Ohms at 23 C Min. Max.
1 Hour (R1) Post-Trip Resistance Max. Time To Trip Tripped Power Dissipation
Ihold Model V max. Volts I max. Amps
Itrip
Amperes at 23 C Hold Trip
Ohms at 23 C Max.
Amperes at 23 C
Seconds at 23 C
Watts at 23 C Typ.
MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100
60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100
0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 0.90 1.10 1.35 1.60 1.85 2.50 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 11.00
0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 1.80 2.20 2.70 3.20 3.70 5.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 22.00
7.3 2.50 2.00 1.50 1.00 0.76 0.52 0.41 0.27 0.18 0.14 0.07 0.10 0.065 0.055 0.040 0.025 0.025 0.020 0.010 0.010 0.005 0.005 0.005 0.005 0.003
11.1 4.50 3.20 2.84 1.95 1.36 0.86 0.77 0.48 0.40 0.31 0.12 0.18 0.115 0.105 0.07 0.048 0.048 0.05 0.03 0.03 0.02 0.02 0.02 0.01 0.01
22.0 7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.22 0.27 0.17 0.15 0.11 0.07 0.07 0.08 0.05 0.05 0.04 0.03 0.03 0.02 0.014
0.5 0.5 0.85 1.0 1.25 1.5 2.0 2.5 3.25 3.75 4.5 4.5 5.5 6.75 8.0 9.25 12.5 12.5 15.0 20.0 25.0 30.0 35.0 40.0 45.0 40.0
5.0 4.0 3.0 2.2 2.5 3.0 3.8 4.0 5.3 6.3 7.2 5.9 6.6 7.3 8.0 8.7 10.3 10.3 10.8 12.7 14.5 16.0 17.5 18.8 *20.0 20.0
0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50
*Tested at 40 amps
Environmental Characteristics Operating/Storage Temperature ........................-40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................125 C Passive Aging......................................................+85 C, 1000 hours ....................................5 % typical resistance change Humidity Aging....................................................+85 C, 85 % R.H. 1000 hours....................5 % typical resistance change Thermal Shock ....................................................-40 C to +85 C, 10 times ..........................10 % typical resistance change Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change Condition A Test Procedures And Requirements For Model MF-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................Verify dimensions and materials..................Per MF physical description Resistance ..........................................................In still air @ 23 C ........................................Rmin R Rmax Time to Trip ........................................................5 times Ihold, Vmax, 23 C..........................T max. time to trip (seconds) Hold Current ......................................................30 min. at Ihold............................................No trip Trip Cycle Life ....................................................Vmax, Imax, 100 cycles ..............................No arcing or burning Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning UL File Number ..................................................E 174545S CSA File Number ................................................CA 110338 TUV File Number ................................................R2057213
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Product manufactured with a date code later than April 1, 2005 is RoHS compliant. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.
Additional Features

Bulk packaging, tape and reel and Ammo-Pak available on most models Patents pending
MF-R Series - PTC Resettable Fuses
Product Dimensions (see next page for outline drawing)
Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Physical Characteristics Style Lead Dia. Material 0.405 4 Sn/NiCu (0.016) 0.51 1 Sn/NiCu (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 3 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.81 2 Sn/Cu (0.032) 0.51 3 Sn/CuFe (0.020) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032)
DIMENSIONS =
0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG)
Packaging options: BULK: All models = 500 pcs. per bag. TAPE & REEL: MF-R005-MF-R160 - 12.7 mm device pitch = 3000 pcs. per reel; MF-R185-MF-R400 - 25.4mm device pitch = 1500 pcs. per reel; MF-R090-0-9 & MF-R250-0-10 = 1500 pcs. per reel. AMMO-PACK: MF-R005-MF-R160 - 12.7 mm device pitch = 2000 pcs. per reel; MF-R185-MF-R400 - 25.4 mm device pitch = 1000 pcs. per reel; MF-R090-0-9 & MF-R250-0-10 = 2000 pcs. per reel.
MM (INCHES)
Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.
MF-R Series - PTC Resettable Fuses
Product Dimensions (see previous page for dimensions)
Style 1
A E
Style 2
A E
Style 3
A E
Style 4
A E
B
B
B
B
D C D
D D
C
C
C
NOTE: Kinked lead option is available for board standoff. Contact factory for details.
NOTE: Also available with straight leads. Contact factory for details.
Thermal Derating Chart - Ihold / Itrip (Amps)
Ambient Operating Temperature Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 -40 C 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 C 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 C 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 23 C 0.05 / 0.10 0.10 / 0.20 0.17 / 0.34 0.20 / 0.40 0.25 / 0.50 0.30 / 0.60 0.40 / 0.80 0.50 / 1.00 0.65 / 1.30 0.75 / 1.50 0.90 / 1.80 0.90 / 1.80 1.10 / 2.20 1.35 / 2.70 1.60 / 3.20 1.85 / 3.70 2.50 / 5.00 2.50 / 5.00 3.00 / 6.00 4.00 / 8.00 5.00 / 10.0 6.00 / 12.0 7.00 / 14.0 8.00 / 16.0 9.00 / 18.0 11.0 / 22.1 40 C 0.04 / 0.08 0.08 / 0.16 0.14 / 0.28 0.16 / 0.32 0.20 / 0.40 0.24 / 0.48 0.32 / 0.64 0.41 / 0.82 0.53 / 1.06 0.61 / 1.22 0.73 / 1.46 0.73 / 1.46 0.91 / 1.82 1.12 / 2.24 1.33 / 2.66 1.54 / 3.08 2.08 / 4.16 2.08 / 4.16 2.49 / 4.98 3.32 / 6.64 4.15 / 8.30 4.98 / 9.96 5.81 / 11.6 6.64 / 13.2 7.47 / 14.9 9.40 / 18.4 50 C 0.04 / 0.08 0.07 / 0.14 0.12 / 0.24 0.14 / 0.28 0.18 / 0.36 0.22 / 0.44 0.29 / 0.58 0.36 / 0.72 0.47 / 0.94 0.54 / 1.08 0.65 / 1.30 0.65 / 1.30 0.85 / 1.70 1.04 / 2.08 1.23 / 2.46 1.42 / 2.84 1.93 / 3.86 1.93 / 3.86 2.31 / 4.62 3.08 / 6.16 3.85 / 7.70 4.62 / 9.24 5.39 / 10.7 6.16 / 12.3 6.93 / 12.7 8.80 / 17.6 60 C 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 C 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 85 C 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4
Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.
MF-R Series - PTC Resettable Fuses
Typical Time to Trip at 23 C
MF -R MF 005 -R0 10 MF -R0 MF 17 -R MF 020 -R MF 025 -R MF 030 -R MF 040 -R MF 050 -R MF 065 -R MF 075 -R0 90
How to Order
MF - R 110 - 0 - 99
Multifuse(R) Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - __ = Bulk Packaging without part number suffix option - 0-99 = Bulk Packaging with part number suffix option - 2 = Tape and Reel without part number suffix option* - 2-99 = Tape and Reel with part number suffix option - AP = Ammo-Pak* - 0-14 = Kinked leads where straight leads are standard - 0-17 = Straight leads where kinked leads are standard
100
Time to trip (Seconds)
10
1
0.1
0.01
Part Number Suffix Option - 99 = As of date code April 1, 2005 all MF-R models are RoHS compliant. The suffix "-99" can be used if a new part number is required to reference the RoHS compliance. Examples: MF-R110 ................Bulk packaging MF-R110-0-99 ......Bulk packaging with part number suffix option MF-R110-2 ............Tape and reel packaging MF-R110-2-99 ......Tape and reel packaging with part number suffix option MF-R090-0-9-99 ....Bulk packaging with part number suffix option MF-R250-0-10-99 ..Bulk packaging with part number suffix option *Packaged per EIA486-B
0.001 0.1 1 10 100
Fault Current (Amps)
MF -0--R09 90 MF -R MF 110 -R MF 135 -R MF 160 -R MF 185 -R 250 250, -0 MF -10 -R3 MF 00 -R MF 400 -R MF 500 -R MF 600 -R7 MF 00 -R MF 800 -R MF 900 -R1 100
Typical Part Marking: MF-R005 - R025
Represents total content. Layout may vary.
100
PART IDENTIFICATION MANUFACTURER'S TRADEMARK DATE CODE: WEEK 1 OF 2000 = 0A (YEAR & WEEK) WEEK 27 OF 2000 = A0 (WEEK & YEAR)
Time to trip (Seconds)
025 0A
10
1
Typical Part Marking: MF-R030 - R1100
Represents total content. Layout may vary.
MANUFACTURER'S TRADEMARK R250 0180T LOT NO. (T = TAIWAN S = CHINA)
0.1
0.01
PART IDENTIFICATION DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR)
0.001 1 10 100
Fault Current (Amps)
Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.
MF-R SERIES, REV. U, 02/06
MF-R, MF-RX, MF-R/90, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications
Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC Mark W W0 EIA Mark W W4 Dimensions Dimensions Tolerance
18 (.709) 11 (.433) -0.5/+1.0 (-0.02/+.039)
Dimension Description Carrier tape width Hold down tape width: all others Hold down tape Top distance between tape edges Sprocket hole position Sprocket hole diameter Abscissa to plane (straight lead) Abscissa to plane (kinked lead) Abscissa to top (straight lead) Abscissa to top (kinked lead) Overall width w/lead protrusion (straight lead) Overall width w/lead protrusion (kinked lead) Overall width w/o lead protrusion (straight lead) Overall width w/o lead protrusion (kinked lead) Lead protrusion Protrusion of cutout Protrusion beyond hold tape Sprocket hole pitch Pitch tolerance Device pitch: MF-R005-MF-R160, MF-R/90 & MF-RX/72 Device pitch: MF-R185-MF-R400, MF-RX110-MF-RX375 Tape thickness Tape thickness with splice: MF-R010-MF-R160 Tape thickness with splice: MF-R250-MF-R1100 MF-RX110-MF-RX375 & MF-R/90 Splice sprocket hole alignment Body lateral deviation Body tape plane deviation Lead spacing Reel width Reel diameter Space between flanges less device
min.
No protrusion W2 W1 D0 H H0 H1 H1 W6 W5 D0 H H0 H1 H1 C1 C1 C2 C2 I1 L I2 P0 L1 L I2 P0
3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433)
max.
-0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02)
max. max. max. max. max. max. max. max.
Not specified
12.7 (0.5) 0.3 (.012)
20 consecutive
12.7 (0.5) 25.4 (1.0)
1
t
t t1 t1
0.9 (.035) 1.5 (.059) 2.3 (.091)
max. max. max.
0.3 (.012) 1.0 (.039) 0.3 (.021) 0.2 (.008)
0 h p F w d W1 h p F W2 a h 0 0
5.08 (0.2) 56 (2.205) 370 (14.57) 4.75 (.187)
max. max.
3.25 (.128)
DIMENSIONS =
MM (INCHES)
Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.
MF-R, MF-RX, MF-R/90, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications
Dimension Description Arbor hole diameter Core diameter: MF-R, MF-RX, MF-R/90 Box: MF-R, MF-RX, MF-R/90 Consecutive missing places: MF-R, MF-RX, MF-R/90 Empty places per reel: MF-R, MF-RX, MF-R/90
IEC Mark f h
EIA Mark c n
Dimensions Dimensions Tolerance
26 (1.024) 80 (3.15) 56 (2.2) 372 (14.6) 372 (14.6) 12.0 (.472)
max. max.
3 Not specified
max.
Taped Component Dimensions - Figure 1
h h p p
Reference plane H1 L P1 F A B W0 H0 W1 W H H1
DIMENSIONS = MM (INCHES)
I2
I1
P0
D0
User direction of feed Cross section A - B
Reel Dimensions - Figure 2
t Reel h d User direction of feed Upper side Tape
Lower side
f
h w
Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

▲Up To Search▲

Price & Availability of MF-R400

	To Download MF-R400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .